Estimation of signal parameters via rotational invariance techniques

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs attention from an expert in statistics. The specific problem is: article reads like an overly detailed proof, and lacks encyclopedic tone. It needs rewriting as per MOS:MATH#TONE. WikiProject Statistics may be able to help recruit an expert. (November 2023) This article reads like a textbook. Please improve this article to make it neutral in tone and meet Wikipedia's quality standards. (November 2023) This article may require copy editing for grammar, style, cohesion, tone, or spelling. You can assist by editing it. (October 2023) (Learn how and when to remove this message) (Learn how and when to remove this message)

Estimation of signal parameters via rotational invariant techniques (ESPRIT), is a technique to determine the parameters of a mixture of sinusoids in background noise. This technique was first proposed for frequency estimation.^[1] However, with the introduction of phased-array systems in everyday technology, it is also used for angle of arrival estimations.^[2]

One-dimensional ESPRIT[edit]

At instance ${\textstyle t}$, the ${\textstyle M}$ (complex -valued) output signals (measurements) ${\textstyle y_{m}[t]}$, ${\textstyle m=1,\ldots ,M}$, of the system are related to the ${\textstyle K}$ (complex -valued) input signals ${\textstyle x_{k}[t]}$, ${\textstyle k=1,\ldots ,K}$, as$${\displaystyle y_{m}[t]=\sum _{k=1}^{K}a_{m,k}x_{k}[t]+n_{m}[t],}$$where ${\textstyle n_{m}[t]}$ denotes the noise added by the system. The one-dimensional form of ESPRIT can be applied if the weights have the form ${\textstyle a_{m,k}=e^{-j(m-1)\omega _{k}}}$, whose phases are integer multiples of some radial frequency ${\displaystyle \omega _{k}}$. This frequency only depends on the index of the system's input, i.e., ${\textstyle k}$. The goal of ESPRIT is to estimate ${\displaystyle \omega _{k}}$'s, given the outputs ${\textstyle y_{m}[t]}$ and the number of input signals, ${\textstyle K}$. Since the radial frequencies are the actual objectives, ${\textstyle a_{m,k}}$ is denoted as ${\textstyle a_{m}(\omega _{k})}$.

Collating the weights ${\textstyle a_{m}(\omega _{k})}$ as ${\displaystyle \mathbf {a} (\omega _{k})=[\,1\,\ e^{-j\omega _{k}}\,\ e^{-j2\omega _{k}}\,\ ...\,\ e^{-j(M-1)\omega _{k}}\,]^{\top }}$ and the ${\textstyle M}$ output signals at instance ${\textstyle t}$ as ${\displaystyle \mathbf {y} [t]=[\,y_{1}[t]\,\ y_{2}[t]\,\ ...\,\ y_{M}[t]\,]^{\top }}$, $${\displaystyle \mathbf {y} [t]=\sum _{k=1}^{K}\mathbf {a} (\omega _{k})x_{k}[t]+\mathbf {n} [t],}$$where ${\displaystyle \mathbf {n} [t]=[\,n_{1}[t]\,\ n_{2}[t]\,\ ...\,\ n_{M}[t]\,]^{\top }}$. Further, when the weight vectors ${\displaystyle \mathbf {a} (\omega _{1}),\ \mathbf {a} (\omega _{2}),\ ...,\ \mathbf {a} (\omega _{K})}$ are put into a Vandermonde matrix ${\displaystyle \mathbf {A} =[\,\mathbf {a} (\omega _{1})\,\ \mathbf {a} (\omega _{2})\,\ ...\,\ \mathbf {a} (\omega _{K})\,]}$, and the ${\displaystyle K}$ inputs at instance ${\textstyle t}$ into a vector ${\displaystyle \mathbf {x} [t]=[\,x_{1}[t]\,\ ...\,\ x_{k}[t]\,]^{\top }}$, we can write$${\displaystyle \mathbf {y} [t]=\mathbf {A} \,\mathbf {x} [t]+\mathbf {n} [t].}$$With several measurements at instances ${\textstyle t=1,2,\dots ,T}$ and the notations ${\textstyle \mathbf {Y} =[\,\mathbf {y} [1]\,\ \mathbf {y} [2]\,\ \dots \,\ \mathbf {y} [T]\,]}$, ${\textstyle \mathbf {X} =[\,\mathbf {x} [1]\,\ \mathbf {x} [2]\,\ \dots \,\ \mathbf {x} [T]\,]}$ and ${\textstyle \mathbf {N} =[\,\mathbf {n} [1]\,\ \mathbf {n} [2]\,\ \dots \,\ \mathbf {n} [T]\,]}$, the model equation becomes$${\displaystyle \mathbf {Y} =\mathbf {A} \mathbf {X} +\mathbf {N} .}$$

Dividing into virtual sub-arrays[edit]

The weight vector ${\textstyle \mathbf {a} (\omega _{k})}$ has the property that adjacent entries are related.$${\displaystyle [\mathbf {a} (\omega _{k})]_{m+1}=e^{-j\omega _{k}}[\mathbf {a} (\omega _{k})]_{m}}$$For the whole vector ${\displaystyle \mathbf {a} (\omega _{k})}$, the equation introduces two selection matrices ${\displaystyle \mathbf {J} _{1}}$and ${\displaystyle \mathbf {J} _{2}}$: ${\displaystyle \mathbf {J} _{1}=[\mathbf {I} _{M-1}}$ and ${\displaystyle \mathbf {J} _{2}=[\mathbf {0} \quad \mathbf {I} _{M-1}]}$. Here, ${\displaystyle \mathbf {I} _{M-1}}$ is an identity matrix of size ${\textstyle (M-1)}$ and ${\displaystyle \mathbf {0} }$ is a vector of zero.

The vectors ${\displaystyle \mathbf {J} _{1}\mathbf {a} (\omega _{k})}$ ${\displaystyle [\mathbf {J} _{2}\mathbf {a} (\omega _{k})]}$ contains all elements of ${\displaystyle \mathbf {a} (\omega _{k})}$ except the last [first] one. Thus, ${\displaystyle \mathbf {J} _{2}\mathbf {a} (\omega _{k})=e^{-j\omega _{k}}\mathbf {J} _{1}\mathbf {a} (\omega _{k})}$ and$${\displaystyle \mathbf {J} _{2}\mathbf {A} =\mathbf {J} _{1}\mathbf {A} \mathbf {H} ,\quad {\text{where}}\quad {\mathbf {H} }:={\begin{bmatrix}e^{-j\omega _{1}}&\\&e^{-j\omega _{2}}\\&&\ddots \\&&&e^{-j\omega _{K}}\end{bmatrix}}.}$$The above relation is the first major observation required for ESPRIT. The second major observation concerns the signal subspace that can be computed from the output signals.

Signal subspace[edit]

The singular value decomposition (SVD) of ${\textstyle \mathbf {Y} }$ is given as$${\displaystyle \mathbf {Y} =\mathbf {U} \mathbf {\Sigma } \mathbf {V} ^{\dagger }}$$where ${\textstyle \mathbf {U} \in \mathbb {C} ^{M\times M}}$ and ${\textstyle \mathbf {V} \in \mathbb {C} ^{T\times T}}$ are unitary matrices and ${\textstyle \mathbf {\Sigma } }$ is a diagonal matrix of size ${\textstyle M\times T}$, that holds the singular values from the largest (top left) in descending order. The operator ${\textstyle \dagger }$ denotes the complex-conjugate transpose (Hermitian transpose).

Let us assume that ${\textstyle T\geq M}$. Notice that we have ${\textstyle K}$ input signals. If there was no noise, there would only be ${\textstyle K}$ non-zero singular values. We assume that the ${\textstyle K}$ largest singular values stem from these input signals and other singular values are presumed to stem from noise. The matrices in SVD of ${\textstyle \mathbf {Y} }$ can be partitioned into submatrices, where some submatrices correspond to the signal subspace and some correspond to the noise subspace.$${\displaystyle {\begin{aligned}\mathbf {U} ={\begin{bmatrix}\mathbf {U} _{\mathrm {S} }&\mathbf {U} _{\mathrm {N} }\end{bmatrix}},&&\mathbf {\Sigma } ={\begin{bmatrix}\mathbf {\Sigma } _{\mathrm {S} }&\mathbf {0} &\mathbf {0} \\\mathbf {0} &\mathbf {\Sigma } _{\mathrm {N} }&\mathbf {0} \end{bmatrix}},&&\mathbf {V} ={\begin{bmatrix}\mathbf {V} _{\mathrm {S} }&\mathbf {V} _{\mathrm {N} }&\mathbf {V} _{\mathrm {0} }\end{bmatrix}}\end{aligned}},}$$where ${\textstyle \mathbf {U} _{\mathrm {S} }\in \mathbb {C} ^{M\times K}}$ and ${\textstyle \mathbf {V} _{\mathrm {S} }\in \mathbb {C} ^{N\times K}}$ contain the first ${\textstyle K}$ columns of ${\textstyle \mathbf {U} }$ and ${\textstyle \mathbf {V} }$, respectively and ${\textstyle \mathbf {\Sigma } _{\mathrm {S} }\in \mathbb {C} ^{K\times K}}$is a diagonal matrix comprising the ${\textstyle K}$ largest singular values.

Thus, The SVD can be written as$${\displaystyle \mathbf {Y} =\mathbf {U} _{\mathrm {S} }\mathbf {\Sigma } _{\mathrm {S} }\mathbf {V} _{\mathrm {S} }^{\dagger }+\mathbf {U} _{\mathrm {N} }\mathbf {\Sigma } _{\mathrm {N} }\mathbf {V} _{\mathrm {N} }^{\dagger },}$$where ${\textstyle \mathbf {U} _{\mathrm {S} }}$, ⁣${\textstyle \mathbf {V} _{\mathrm {S} }}$, and ${\textstyle \mathbf {\Sigma } _{\mathrm {S} }}$ represent the contribution of the input signal ${\textstyle x_{k}[t]}$ to ${\textstyle \mathbf {Y} }$. We term ${\textstyle \mathbf {U} _{\mathrm {S} }}$ the signal subspace. In contrast, ${\textstyle \mathbf {U} _{\mathrm {N} }}$, ${\textstyle \mathbf {V} _{\mathrm {N} }}$, and ${\textstyle \mathbf {\Sigma } _{\mathrm {N} }}$ represent the contribution of noise ${\textstyle n_{m}[t]}$ to ${\textstyle \mathbf {Y} }$.

Hence, from the system model, we can write ${\textstyle \mathbf {A} \mathbf {X} =\mathbf {U} _{\mathrm {S} }\mathbf {\Sigma } _{\mathrm {S} }\mathbf {V} _{\mathrm {S} }^{\dagger }}$ and ${\textstyle \mathbf {N} =\mathbf {U} _{\mathrm {N} }\mathbf {\Sigma } _{\mathrm {N} }\mathbf {V} _{\mathrm {N} }^{\dagger }}$. Also, from the former, we can write$${\displaystyle \mathbf {U} _{\mathrm {S} }=\mathbf {A} \mathbf {F} ,}$$where ${\displaystyle {\mathbf {F} }=\mathbf {X} \mathbf {V} _{\mathrm {S} }\mathbf {\Sigma } _{\mathrm {S} }^{-1}}$. In the sequel, it is only important that there exist such an invertible matrix ${\textstyle \mathbf {F} }$ and its actual content will not be important.

Note: The signal subspace can also be extracted from the spectral decomposition of the auto-correlation matrix of the measurements, which is estimated as$${\displaystyle \mathbf {R} _{\mathrm {YY} }={\frac {1}{T}}\sum _{t=1}^{T}\mathbf {y} [t]\mathbf {y} [t]^{\dagger }={\frac {1}{T}}\mathbf {Y} \mathbf {Y} ^{\dagger }={\frac {1}{T}}\mathbf {U} {\mathbf {\Sigma } \mathbf {\Sigma } ^{\dagger }}\mathbf {U} ^{\dagger }={\frac {1}{T}}\mathbf {U} _{\mathrm {S} }\mathbf {\Sigma } _{\mathrm {S} }^{2}\mathbf {U} _{\mathrm {S} }^{\dagger }+{\frac {1}{T}}\mathbf {U} _{\mathrm {N} }\mathbf {\Sigma } _{\mathrm {N} }^{2}\mathbf {U} _{\mathrm {N} }^{\dagger }.}$$

Estimation of radial frequencies[edit]

We have established two expressions so far: ${\textstyle \mathbf {J} _{2}\mathbf {A} =\mathbf {J} _{1}\mathbf {A} \mathbf {H} }$ and ${\textstyle \mathbf {U} _{\mathrm {S} }=\mathbf {A} \mathbf {F} }$. Now, $${\displaystyle {\begin{aligned}\mathbf {J} _{2}\mathbf {A} =\mathbf {J} _{1}\mathbf {A} \mathbf {H} \implies \mathbf {J} _{2}(\mathbf {U} _{\mathrm {S} }\mathbf {F} ^{-1})=\mathbf {J} _{1}(\mathbf {U} _{\mathrm {S} }\mathbf {F} ^{-1})\mathbf {H} \implies \mathbf {S} _{2}=\mathbf {S} _{1}\mathbf {P} ,\end{aligned}}}$$where ${\displaystyle \mathbf {S} _{1}=\mathbf {J} _{1}\mathbf {U} _{\mathrm {S} }}$ and ${\displaystyle \mathbf {S} _{2}=\mathbf {J} _{2}\mathbf {U} _{\mathrm {S} }}$ denote the truncated signal sub spaces, and $${\displaystyle \mathbf {P} =\mathbf {F} ^{-1}\mathbf {H} \mathbf {F} .}$$The above equation has the form of an eigenvalue decomposition, and the phases of eigenvalues in the diagonal matrix ${\displaystyle \mathbf {H} }$ are used to estimate the radial frequencies.

Thus, after solving for ${\displaystyle \mathbf {P} }$ in the relation ${\displaystyle \mathbf {S} _{2}=\mathbf {S} _{1}\mathbf {P} }$, we would find the eigenvalues ${\textstyle \lambda _{1},\ \lambda _{2},\ \ldots ,\ \lambda _{K}}$ of ${\displaystyle \mathbf {P} }$, where ${\displaystyle \lambda _{k}=\alpha _{k}\mathrm {e} ^{j\omega _{k}}}$, and the radial frequencies ${\displaystyle \omega _{1},\ \omega _{2},\ \ldots ,\ \omega _{K}}$ are estimated as the phases (argument) of the eigenvalues.

Remark: In general, ${\displaystyle \mathbf {S} _{1}}$ is not invertible. One can use the least squares estimate ${\displaystyle {\mathbf {P} }=(\mathbf {S} _{1}^{\dagger }{\mathbf {S} _{1}})^{-1}\mathbf {S} _{1}^{\dagger }{\mathbf {S} _{2}}}$. An alternative would be the total least squares estimate.

Algorithm summary[edit]

Input: Measurements ${\textstyle \mathbf {Y} :=[\,\mathbf {y} [1]\,\ \mathbf {y} [2]\,\ \dots \,\ \mathbf {y} [T]\,]}$, the number of input signals ${\textstyle K}$ (estimate if not already known).

1. Compute the singular value decomposition (SVD) of ${\textstyle \mathbf {Y} =\mathbf {U} \mathbf {\Sigma } \mathbf {V} ^{\dagger }}$ and extract the signal subspace ${\textstyle \mathbf {U} _{\mathrm {S} }\in \mathbb {C} ^{M\times K}}$ as the first ${\textstyle K}$ columns of ${\textstyle \mathbf {U} }$.
2. Compute ${\textstyle \mathbf {S} _{1}=\mathbf {J} _{1}\mathbf {U} _{\mathrm {S} }}$ and ${\textstyle \mathbf {S} _{2}=\mathbf {J} _{2}\mathbf {U} _{\mathrm {S} }}$, where ${\displaystyle \mathbf {J} _{1}=[\mathbf {I} _{M-1}\quad \mathbf {0} ]}$ and ${\displaystyle \mathbf {J} _{2}=[\mathbf {0} \quad \mathbf {I} _{M-1}]}$.
3. Solve for ${\textstyle \mathbf {P} }$ in ${\textstyle \mathbf {S} _{2}=\mathbf {S} _{1}\mathbf {P} }$ (see the remark above).
4. Compute the eigenvalues ${\textstyle \lambda _{1},\lambda _{2},\ldots ,\lambda _{K}}$ of ${\textstyle \mathbf {P} }$.
5. The phases of the eigenvalues ${\textstyle \lambda _{k}=\alpha _{k}\mathrm {e} ^{j\omega _{k}}}$ provide the radial frequencies ${\textstyle \omega _{k}}$, i.e., ${\textstyle \omega _{k}=\arg \lambda _{k}}$

Notes[edit]

Choice of selection matrices[edit]

In the derivation above, the selection matrices ${\displaystyle \mathbf {J} _{1}=[\mathbf {I} _{M-1}\quad \mathbf {0} ]}$ and ${\displaystyle \mathbf {J} _{2}=[\mathbf {0} \quad \mathbf {I} _{M-1}]}$ were used. However, any appropriate matrices ${\textstyle \mathbf {J} _{1}}$ and ${\displaystyle \mathbf {J} _{2}}$ may be used as long as the rotational invariance ${\textstyle (}$i.e., ${\displaystyle \mathbf {J} _{2}\mathbf {a} (\omega _{k})=e^{-j\omega _{k}}\mathbf {J} _{1}\mathbf {a} (\omega _{k})}$${\textstyle )}$, or some generalization of it (see below) holds; accordingly, the matrices ${\textstyle \mathbf {J} _{1}\mathbf {A} }$ and ${\textstyle \mathbf {J} _{2}\mathbf {A} }$ may contain any rows of ${\textstyle \mathbf {A} }$.

Generalized rotational invariance[edit]

The rotational invariance used in the derivation may be generalized. So far, the matrix ${\displaystyle \mathbf {H} }$ has been defined to be a diagonal matrix that stores the sought-after complex exponentials on its main diagonal. However, ${\displaystyle \mathbf {H} }$ may also exhibit some other structure.^[3] For instance, it may be an upper triangular matrix. In this case, ${\textstyle \mathbf {P} =\mathbf {F} ^{-1}\mathbf {H} \mathbf {F} }$constitutes a triangularization of ${\displaystyle \mathbf {P} }$.

See also[edit]

• Multiple signal classification
• Generalized pencil-of-function method
• Independent component analysis

References[edit]

Further reading[edit]

• Paulraj, A.; Roy, R.; Kailath, T. (1985), "Estimation Of Signal Parameters Via Rotational Invariance Techniques - Esprit", Nineteenth Asilomar Conference on Circuits, Systems and Computers, pp. 83–89, doi:10.1109/ACSSC.1985.671426, ISBN 978-0-8186-0729-5, S2CID 2293566.
• Roy, R.; Kailath, T. (1989). "Esprit - Estimation Of Signal Parameters Via Rotational Invariance Techniques" (PDF). IEEE Transactions on Acoustics, Speech, and Signal Processing. 37 (7): 984–995. doi:10.1109/29.32276. S2CID 14254482. Archived from the original (PDF) on 2020-09-26. Retrieved 2011-07-25..
• Ibrahim, A. M.; Marei, M. I.; Mekhamer, S. F.; Mansour, M. M. (2011). "An Artificial Neural Network Based Protection Approach Using Total Least Square Estimation of Signal Parameters via the Rotational Invariance Technique for Flexible AC Transmission System Compensated Transmission Lines". Electric Power Components and Systems. 39 (1): 64–79. doi:10.1080/15325008.2010.513363. S2CID 109581436.
• Haardt, M., Zoltowski, M. D., Mathews, C. P., & Nossek, J. (1995, May). 2D unitary ESPRIT for efficient 2D parameter estimation. In icassp (pp. 2096-2099). IEEE.