File information

Last updated

Original upload

Created by

aedenthorn

Uploaded by

aedenthorn

Virus scan

Safe to use

Tags for this mod

About this mod

Allows you to replace instances of game textures with custom png files.

Requirements
Permissions and credits
Changelogs
Donations
Description

This mod should allow you to replace the following:

  • player model textures
  • item inventory icons
  • equipment textures like armor, weapons, and tools
  • terrain and water textures
  • environmental textures
  • special location textures (villages, crypts, rune stones, etc.)
  • world object textures, almost everything else in the game world

It also now supports layers, so you can apply multiple textures to the same vanilla texture (see Layers below).

To create your own custom textures requires basic reading comprehension! It's not that difficult, but please read all of the information below carefully before asking for help.


Basic Usage

To extract the vanilla textures for reference, I use Asset Studio. The textures are in the valheim_Data/sharedassets files.

To replace a texture, you simply add a png file to the folder BepInEx/plugins/CustomTextures with the proper name format explained below, and then load the game.

You can also organize textures into subfolders! If you are publishing a texture pack I encourage you to do this, to allow easy install and removal.

Also, if you are publishing a texture pack, putting your textures in a CustomTextures folder before creating the zip file will allow Vortex to install them automatically!


To reload world textures while in game, there is a hotkey (default Page Down). Note: this doesn't reload any vanilla textures, so if you remove a custom texture file, you'll have to restart the game to see the vanilla texture again.

For a list of mods creating custom textures with this mod, click on Requirements above this description.

Here's some kind person's video on how to use this mod with premade texture packs.


Filter Mode

Valheim textures use point filtering, which makes them look pixelated up close. If you want to use bilinear or trilinear filtering for higher-res textures, place your textures in a subfolder named bilinear or trilinear and the mod will change the filter mode for those textures (they can still be in sub-subfolders if you choose).


File Naming Summary

File names are made up of up to four parts, prefixes, identifiers, property names, and layer names. To get most of this information, use the scene dump (see Scene Dump below)

You create file names starting with a prefix, usually followed by an underscore, then an identifier, then the property name (and optionally an underscore followed by a layer name, as explained under Layers), i.e. for a complete texture replacement:

<prefix>_<identifier><propertyName>.png

or for a layer:

<prefix>_<identifier><propertyName>_<layerName>.png

You end up with a file name like this, and you place it somewhere in the CustomTextures folder.

Property names are usually prefixed by an underscore, so don't forget that too. Also, if you have Windows hiding your file extensions, don't
add .png to the end or you'll end up with a file called <prefix>_<identifier><propertyName>.png.png which won't work. Seriously, just have Windows show file extensions, it's dumb that it doesn't.

Here's an explanation of each of the four parts:

Prefixes

The following prefixes are implemented, based on the type of thing being modified:

  • player_model for player textures
  • atlas_item_icons for inventory icons
  • object for object textures
  • armor for armor textures
  • zone for water textures
  • terrain for terrain textures
  • environment for environment textures
  • location for special locations

For objects, water, terrain, environment, and location textures, the prefix can be further modified as follows:

  • <prefix>renderer - for replacing textures on specific named renderers on specific named things
  • <prefix>mat - for replacing textures on specific named materials on specific named things
  • <prefix>renderermat - for replacing textures on specific named materials on specific named renderers on specific named things
  • <prefix>texture - for replacing specific named textures on specific named things

e.g.:

environmentrenderermat_YggdrasilBranch_branch_yggdrasil_branch (Instance)_MainTex.png

will replace the main texture on the yggdrasil_branch (Instance) material on the branch renderer on the YggdrasilBranch environment object.

You can also use the following prefixes based on the name of the component:

  • texture for universally replacing a texture (where supported)
  • renderer for replacing the texture on any named renderer
  • mat for replacing the texture on any named material:
So, some easiers way to do the above are:

texture_yggbark_d_MainTex.png
mat_yggdrasil_branch (Instance)_MainTex.png


Identifiers

You can find the identifiers used with the above prefixes in the scene dump. More on this in each detailed section below.


Property Names

You can find the property names in the scene dump as well. Mostly you'll want to replace _MainTex and maybe _BumpMap or _SkinBumpMap.


Layer Names:

See Layers below.


Replacement Types

Here's the details on each type of replacement:

Player Textures

For the base player character texture, use the following syntax:

player_model_<modelNumber><suffix>.png


Replace <modelNumber> with either 0 for male or 1 for female. E.g.:

player_model_1_MainTex.png


Item Inventory Icons

These are the little images that show up in your inventory to represent an in game item. They are all on a single graphic called sactx-2048x2048-Uncompressed-IconAtlas-61238c20 #845.

To replace the inventory icon sheet create an equivalent sheet called:

atlas_item_icons.png


You can use any resolution, as it will be scaled to fit.

You can also replace a single item icon using a layer (see Layers below).


Object and Armor Textures

Note:
Equipment and world objects are now all considered objects. The mod will still recognize the items_ prefix, just for backwards compatibility.

Besides player models and inventory icons, everything else this mod affects is considered an object.

For example:

  • Resources like coal and wood
  • Tools like hammers and cultivators
  • Plants, trees, bushes
  • Building blocks
  • Enemies

Armor is for what the object looks like when you're wearing it (as opposed to throwing it on the ground with the rest of your crap).


The general filename syntax for all of these things is:

<prefix>_<identifier><suffix>.png


Prefixes:

The following prefixes for objects and armor are now implemented:

  • object - used to change all textures of the type <suffix> on a specific world object type. <identifier> should be the object spawn name
  • objectrenderer (objectmesh also works, but is depreciated) - used to change all textures of the type <suffix> on a specific renderer on a specific object. The <identifier> (see Identifiers) should be the object name and the renderer name, separated by underscore: <objectName>_<rendererName>
  • objecttexture - used to change a specific named texture of the type <suffix> on every renderer on a specific object. The <identifier> (see Identifiers) should be the object name and the texture name, separated by underscore: <objectName>_<textureName>
  • objectmat - used to change textures on all specifically named materials on a specific object. The <identifier> (see Identifiers) should be the object name and the material name, separated by underscore: <objectName>_<materialName>
  • objectrenderermat - used to change textures on a specifically named material on a specifically named renderer on a specific object. The <identifier> (see Identifiers) should be the object name and the material name, separated by underscore: <objectName>_<rendererName>_<materialName>
  • texture - used to change all instances of a specific texure of the type <suffix> on all objects and items that use that texture. The <identifier> (see Identifiers) should be the texture name (not necessarily the exported file name!)
  • renderer - used to change textures of the type <suffix> on all instances of a specific renderer on all objects and items. The <identifier> (see Identifiers) should be the renderer name.
  • mat - used to change textures of the type <suffix> on all instances of a specific material on all objects and items. The <identifier> (see Identifiers) should be the material name.
  • armor - used to change the chest or legs of armor items - note that the rest of the armor's parts are affected by object_ rather than this.


Suffixes:

Note: Suffixes have been overhauled. Old suffixes of _texture and _bump are still recognized but should be replaced with the actual property name.

Suffixes tell the mod which texture you want to replace, called "properties".

The scene dump gives a list of properties for each material on an object, e.g.:

object ArmorIronChest has 1 SkinnedMeshRenderers:
    SkinnedMeshRenderer name: IronArmor
        smr IronArmor has 1 materials
            IronArmorChest_mat (Instance):
                properties:
                    _MainTex IronArmorChest_d
                    _BumpMap IronArmorChest_n
                    _EmissionMap
                    _MetallicGlossMap IronArmorChest_m
                    _StyleTex
armor ArmorIronChest has Material:
    Armor name: IronArmorPlayer_chest
                properties:
                    _MainTex
                    _ChestBumpMap IronArmorChestPlayer_n
                    _ChestMetal IronArmorChestPlayer_m
                    _ChestTex IronArmorChestPlayer_d
                    _LegsBumpMap
                    _LegsMetal
                    _LegsTex
                    _SkinBumpMap

This object has both a skinned mesh renderer and an armor material. They are separate.

The object is all the fancy bits that get stuck on the player.

The armor is the texture that gets pasted onto the player's legs and chest.

Each property is shown with its texture name (if there is one), e.g. the name of the object's _MainTex is IronArmorChest_d.

_MainTex
refers to the main texture. Mostly that's the one you want to replace. For armor, however, replacing _MainTex may not do anything - replacing it with a transparent texture seems to work best. To change the actual armor, you need to use _ChestTex and / or _LegsTex and make sure it's only covering the area of the actual armor (see the exported IronArmorChestPlayer_m.png for example). So, you would want to create the following:

object_ArmorIronChest_MainTex.png
armor_ArmorIronChest_ChestTex.png

Armor is complicated, best to experiment!


Identifiers

To get identifiers for objects, use names on the spawn list here:

https://www.reddit.com/r/valheim/comments/lig8ml/spawn_item_command_list/

They will also be in the scene dump mentioned above.


Water and Terrain Textures

Water and terrain textures use a similar syntax to objects, i.e.:

<prefix>_<identifier><suffix>.png


Water

Water textures are inside of zone objects, so in the scene dump you'll now see:

zone _GameMain has 2 MeshRenderers:
    MeshRenderer name: WaterSurface
        mr WaterSurface has 1 materials
            water (Instance):
                properties:
                    _FoamTex foam
                    _Normal nRHPu
                    _FoamHighTex foam_highres
                    _NormalFine normalmap2
                    _RandomFoamTex random_foam
    MeshRenderer name: sub_water_opak_thingyu
        mr sub_water_opak_thingyu has 1 materials
            water_bottomplane (Instance):
                properties:


The prefix here is zone, So use, e.g.:

zone__GameMain_FoamTex.png (note the double underscore!)


Terrain

Right after the zone entry, you'll see:

terrain _GameMain, prefab _Zone (UnityEngine.GameObject)
                properties:
                    _MainTex grass
                    _NoiseTex Noise
                    _ClearedMaskTex
                    _CliffNormal gouacherock_big_n
                    _CultivatedNormal cultivated_n
                    _DiffuseTex0 diffuse0
                    _DirtNormal dirt_normal_generated
                    _ForestNormal forest_n
                    _GrassNormal grass_normal_generated
                    _PavedNormal paved_n
                    _RockNormal gouacherock_n
                    _SnowNormal snow_normal


The prefix here is terrain, so use, e.g.:

terrain__GameMain_DiffuseTex0.png

The diffuse0 texture appears to have sixteen tiles with different terrain types on it. You can see an example of its use in the screenshots.


Environment Textures

Environment textures are things like rain, clouds, fog, and that big-assed tree thing in the sky.

The scene dump shows, e.g.:

environment YggdrasilBranch has 1 MeshRenderers:
    MeshRenderer name: branch
        mr branch has 2 materials
            yggdrasil_branch (Instance):
                properties:
                    _MainTex yggbark_d
                    _BumpMap yggbark_n
                    _EmissiveTex yggdrasil_emissive
                    _MossTex ygg_moss
                    _EmissiveMaskTex yggdrasil_emissivmask
                    _RefractionNormal
            yggdrasil_branch_leafs (Instance):
                properties:
                    _MainTex ygg_leaf_d
                    _BumpMap ygg_leaf_n
                    _EmissiveTex
                    _MossTex
                    _EmissiveMaskTex
                    _RefractionNormal



So, as mentioned above:

environmentrenderermat_branch_yggdrasil_branch (Instance)_MainTex.png

will replace the main texture on the yggdrasil_branch (Instance) material on the branch renderer, on the YggdrasilBranch environment object.


Special Locations

Location prefabs are separate from the rest of the game models, so must be handled separately. They have a lot of renderers, so they can take a lot of time to iterate through. For this reason, you can disable location replacement in the config. Also, locations must use the location prefix (texture_ will have no effect).


Layers

Layers allow you to apply a partial texture on top of an existing or modified texture. For everything but sprites, this works in the same way:


Texture Layers

To add a layer to anything but a sprite sheet, use the same syntax as if you were replacing that type of texture in the appropriate section above and add _<YourLayerName> to the end. So, for player eye texture of a mod called RealEyes, it would be:

player_model_0_MainTex_RealEyes.png

<YourLayerName> can be set to whatever you want, as long as it is unique and does not contain any underscores.


Sprite Layers

Sprite layers for the item icons sheet work differently, overwriting a patch of the sprite sheet completely. As a result, the sprite layer png should only be the size of the patch you want to replace. The file format for item icons layers is as follows:

atlas_item_icons_<startX>_<startY>_<sheetWidth>_<sheetHeight>.png

This is because you may be working with upscaled textures, so you need to let the mod know how big the theoretical sheet you are working with is. The mod will compare it to the existing sheet (or sheet replaced by another texture) and figure out the scale of your layer texture from that. So, to replace the wooden shield texture, for example, I use a 64x64 pixel png called:

atlas_item_icons_1224_1840_2048_2048.png

This tells it that my png is from a sheet 2048x2048 pixels big (equal to the vanilla sheet size) and to replace the existing sheet with my 64x64 pixel png starting with pixel 1224x1840 as the top left corner.


Examples

Let's take an example from the scene dump:

object VikingShip has 1 SkinnedMeshRenderers:
    SkinnedMeshRenderer name: sail_full
        smr sail_full has 1 materials
            sail (Instance):
                properties:
                    _MainTex sail_diffuse
                    _BumpMap sail_normal
                    _EmissiveTex
                    _MossTex


You can choose which prefix and identifier to use, based on what you want to do:


1. Set All Textures on an Object Type

object_VikingShip_MainTex.png

This replaces the main texture of every material in the object, so if an object uses multiple textures it probably won't work well. This wouldn't work well for our example, as there are a bunch of MeshRenderers on the ship as well. If we want to change the bump map, we can use:

object_VikingShip_BumpMap.png


2. Set All Instances of a Texture

texture_sail_diffuse_MainTex.png

This replaces all textures that have the name sail_diffuse, so every object that uses that texture should be affected. For our example it would replace the
sails on other ship types as well if they use that texture.


3. Set a Texture for a Single Mesh On an Object Type

objectrenderer_VikingShip_sail_full_MainTex.png

This will replace the texture of any renderer named sail_full on all VikingShip objects.


4. Set a Texture By Name On an Object Type

objecttexture_VikingShip_sail_diffuse_MainTex.png

This will replace any texture named sail_diffuse on all VikingShip objects.


4. Set a Partial Texture Layer

Any of the above examples could alternatively be added as a partial layer by adding a layer name on to the end. So if you just want to add a decal onto the sail of the viking ship, you could do:

objecttexture_VikingShip_sail_diffuse_MainTex_CoolSkullAndCrossBones.png



Config

A config file BepInEx/config/aedenthorn.CustomTextures.cfg is created after running the game once with this mod).

You can adjust the config values by editing this file using a text editor or in-game using the Config Manager.



Scene Dump

To get all the information you need to make the names above, set the config option DumpSceneTextures to true, then run the game and load into your world once. A file BepInEx/plugins/CustomTextures/scene_dump.txt should be created. You can set it back to false after you've dumped the textures, otherwise it will recreate the file every time you run the game.


This mod is still a work in progress.



Technical

To install this mod, the easiest way is to just use Vortex, the Nexus Mods mod manager. It should take care of all dependencies.

To install manually, place the dll file in the BepInEx/plugins folder. You will need BepInEx.

Code is at https://github.com/aedenthorn/ValheimMods.

If you want to complain or ask for help or help me test my mods, you can visit my Discord server.

Click here for a list of all my mods for Valheim.